- 本站编辑：财神888电玩发布日期：2019-09-15 11:34 浏览次数：
If the core shooter fails, the manufacturers will be very anxious to repair and use it as soon as possible. But do you know the cause and solution of the core shooter failures? Don't worry, Zhejiang Institute of Mechanical and Electrical Design Co., Ltd. Foundry Institute will tell you this.
If the power and PC indicator lights of the core shooter are not on, it may be that the power supply is not connected or the safety pipe is damaged. At this time, the power supply should be checked and the same specification of the safety pipe should be replaced in time.
If the closing mode of the core shooter is abnormal, it may be the inappropriate position of the proximity switch of the forward and backward action of the barrel and the pressing action of the barrel. At this time, two proximity switches should be adjusted so that the barrel is in the state of retreat and loosening.
If the forward nozzle of the core shooter does not react, it may be that the pneumatic power supply is not turned on, so there is no pneumatic pressure. It may also be that the approaching position of the barrel is inappropriate, and the adjustment of the barrel's loosening approaching state can be solved.
If there is abnormal pressure on the nozzle of the core shooter, it means that the position of the nozzle forward approach switch is not appropriate, then adjusting the nozzle forward approach switch can be done.